Software installation Instruction for MS Windows 10...Recommended step-by-step installation procedure:
1. Connect Dive Computer with USB-to-microUSB cable.
Windows will create virtual COM port and assign unique COM port number, that should be used in all software.
2. COM port number discovery:
- "Start" button --> «Control Panel» --> «System and Security» --> «System» --> «Deceive Manager» --> «Ports (COM и LPT)».
- You should locate next port in this list: «Silicon Labs CP210x USB to UART Bridge (COM3)»: therefore Seawooch Mk2 connected to port COM3.
Logbook download and Config manipulation- DOWNLOAD LOGBOOK:
- From top menu: «Import» --> «Import from Divecomputer»:
- Vendor: "Heinrichs Weikamp",
- Deve computer: OSTC Mk2
- COM port: "COM3" *use here COM port number discovered in 2.
- Click on "Download" (Dive Computer should be turned ON - Display should show Surface screen!).
- Wait till download complete.
- SETUP YOUR NAME:
- From top menu:«File» --> «Configure dive computer»:
- Select from the list appropriated COM 3 (discovered in 2)
- Select picture with "OSTC, Mk.2/2N/2C"
- Click on "Connect" button
- Click on "Retrieve available details" button
- Enter desired text into "Custom Text" field
- Click on "Save changes to device" button
Firmware update- Unzip archive into any folder.
- Connect Seawooch Mk2 Dive Computer to Windows PC.
- The RED LED should start blinking - external power supply connected and accumulator charging
- Lunch tinybldWin.exe
- Tinybootloader configuring:
- Set communication speed Comm: 19200
- Click on "Search"
- Select from the list appropriated COM 3 (discovered in 2)
- Select file to upload - "Browse", then click "Open". See latest firmware ON THIS PAGE
- Put STRONG magnet on Mk2 glas (over "SEAWOOCH Mk2" label)
- Check that the display goes blank and RED Led stop blinking. If no - locate more powerful magnet
- Click on "Write Flash"
- As soon as you see blue dashed "progress line" under "CheckPIC" button - remove magnet from Dive Computer (you have 10 sec for do this)
- Waiting till Firmware upload finish and Dive Computer turn on Display